RC-WinTrans - RC-WinTrans Support - Error using RCWInTrans with Continuous integration

RC-WinTrans - RC-WinTrans Support - Error using RCWInTrans with Continuous integration - Messages https://www.rc-wintrans.com/forum_srv/messages.aspx?TopicID=80 RC-WinTrans - RC-WinTrans Support - Error using RCWInTrans with Continuous integration - Messages en-us http://blogs.law.harvard.edu/tech/rss Jitbit AspNetForum Fri, 19 Apr 2013 20:06:28 GMT Fri, 19 Apr 2013 20:06:28 GMT https://www.rc-wintrans.com/forum_srv/messages.aspx?TopicID=80 Message from Support
We do not know what influence the NAet tool may have.
Using NAet to run RC-WinTrans command line commands has not been tested.
Actually I think we cannot help.

Regards,
Support, Schaudin.com]]> Fri, 19 Apr 2013 20:06:28 GMT https://www.rc-wintrans.com/forum_srv/messages.aspx?TopicID=80 Message from farhan

Event Type: Error
Event Source: .NET Runtime 2.0 Error Reporting
Event Category: None
Event ID: 1000
User: N/A
Computer: XXXXXXXXXXXXXXX
Description:
Faulting application rcwintrans9.exe, version 9.1.0.93, stamp 4d448621, faulting module ntdll.dll, version 5.1.2600.6055, stamp 4d00f27d, debug? 0, fault address 0x0000108d.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp." target="_blank" rel="nofollow">http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 00 70 00 70 00 6c 00 A.p.p.l.
0008: 69 00 63 00 61 00 74 00 i.c.a.t.
0010: 69 00 6f 00 6e 00 20 00 i.o.n. .
0018: 46 00 61 00 69 00 6c 00 F.a.i.l.
0020: 75 00 72 00 65 00 20 00 u.r.e. .
0028: 20 00 72 00 63 00 77 00 .r.c.w.
0030: 69 00 6e 00 74 00 72 00 i.n.t.r.
0038: 61 00 6e 00 73 00 39 00 a.n.s.9.
0040: 2e 00 65 00 78 00 65 00 ..e.x.e.
0048: 20 00 39 00 2e 00 31 00 .9...1.
0050: 2e 00 30 00 2e 00 39 00 ..0...9.
0058: 33 00 20 00 34 00 64 00 3. .4.d.
0060: 34 00 34 00 38 00 36 00 4.4.8.6.
0068: 32 00 31 00 20 00 69 00 2.1. .i.
0070: 6e 00 20 00 6e 00 74 00 n. .n.t.
0078: 64 00 6c 00 6c 00 2e 00 d.l.l...
0080: 64 00 6c 00 6c 00 20 00 d.l.l. .
0088: 35 00 2e 00 31 00 2e 00 5...1...
0090: 32 00 36 00 30 00 30 00 2.6.0.0.
0098: 2e 00 36 00 30 00 35 00 ..6.0.5.
00a0: 35 00 20 00 34 00 64 00 5. .4.d.
00a8: 30 00 30 00 66 00 32 00 0.0.f.2.
00b0: 37 00 64 00 20 00 66 00 7.d. .f.
00b8: 44 00 65 00 62 00 75 00 D.e.b.u.
00c0: 67 00 20 00 30 00 20 00 g. .0. .
00c8: 61 00 74 00 20 00 6f 00 a.t. .o.
00d0: 66 00 66 00 73 00 65 00 f.f.s.e.
00d8: 74 00 20 00 30 00 30 00 t. .0.0.
00e0: 30 00 30 00 31 00 30 00 0.0.1.0.
00e8: 38 00 64 00 0d 00 0a 00 8.d.....

Followed by this error

Event Type: Error
Event Source: .NET Runtime
Event Category: None
Event ID: 1023
User: N/A
Computer: XXXXXXXXXXXXXXX
Description:
.NET Runtime version 2.0.50727.3643 - Fatal Execution Engine Error (7A0BCA72) (80131506)

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp." target="_blank" rel="nofollow">http://go.microsoft.com/fwlink/events.asp.]]> Wed, 17 Apr 2013 16:24:29 GMT https://www.rc-wintrans.com/forum_srv/messages.aspx?TopicID=80 Message from farhan
We do use rwtcmd.exe from a batch file which invokes RC-WinTrans as COM server (for sure)

I also confirm we use the /a flag to force shutdown after each action called.
-- One thing we do notice that even after successful operation RcWinTrans.exe keeps running as a process.

Hope this will help you to further help us in identifying this issue.

Support wrote:

Hello farhan,

This is difficult. I do not know who generates the error and why.
An error message "An error occurred! Please check the project and language settings in this batch file." I have never seen or heard about.

The problem may be forced because ...
- the fact that the command line tool (rwtcmd.exe) starts and uses RC-WinTrans as COM server (?)
- a command (from rwtcmd.exe) comes faster then the .NET garbage collection (GC) from the previous RC-WinTrans usage (previous command) is cleared (?). (RC-WinTrans uses many .NET objects each in combination with COM objects. The number increases with the size of a project ).

Regards,
Support, Schaudin.com

]]> Wed, 17 Apr 2013 08:05:48 GMT https://www.rc-wintrans.com/forum_srv/messages.aspx?TopicID=80 Message from Support
This is difficult. I do not know who generates the error and why.
An error message "An error occurred! Please check the project and language settings in this batch file." I have never seen or heard about.

The problem may be forced because ...
- the fact that the command line tool (rwtcmd.exe) starts and uses RC-WinTrans as COM server (?)
- a command (from rwtcmd.exe) comes faster then the .NET garbage collection (GC) from the previous RC-WinTrans usage (previous command) is cleared (?). (RC-WinTrans uses many .NET objects each in combination with COM objects. The number increases with the size of a project ).

Regards,
Support, Schaudin.com]]> Fri, 12 Apr 2013 22:15:51 GMT https://www.rc-wintrans.com/forum_srv/messages.aspx?TopicID=80 Message from farhan
We have integrated RCWintrans in our continuous integration process and use the RWTCmd to do translations. However many a times we get this error

[font=verdana, helvetica, arial][exec] The server threw an exception. (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))[/font]
[font=verdana, helvetica, arial][exec] An error occurred! Please check the project and language settings in this batch file.[/font]
[font=verdana, helvetica, arial][exec] RCWinTrans will be killed in 5 seconds. This is your last chance to quit.[/font]

[font=verdana, helvetica, arial]
[/font]
[font=verdana, helvetica, arial]When we run the commandline tool directly it works fine. The problem is only when Nant tries to execute the RWTCmd.[/font]
[font=verdana, helvetica, arial]
[/font]
Also this does not happens always but often.
edited by farhan on 05.04.2013]]> Fri, 05 Apr 2013 15:16:29 GMT